KATO N Scale 29351 | EM13 DCC Decoder

Kato Digitrax DCC Decoder.


29-351 Decoder For Control Car With Motor.


Please read this instruction sheet carefully prior to the use.


How to install the Decoder

1. Please slide the under-cover over chassis in direction of the arrow and take it off.

2. Please insert such a tool as flat headed screwdriver between car body and truck and
remove the truck.

3. Please insert carefully the decoder in the direction indicated in the picture.

4. Please make sure that the decoder is inserted firmly to the very end.

5. Please fit the truck to the original position and put the under-cover on again before
running the car. When the under-cover is not put over, the power might not come
to the decoder, causing the non function of the decoder.


Rating and function of EM13 decoder for Motor Car
Default (initial) address value: 03 (Range it can be changed in: 01-9983)

Maximum Current: 1.0A (Peak Current Value: 1.5A)

Function Circuits: No (Only with circuit for Motor)

Complete with BEMF (Run with stable speed using Back Electric Magnetic Field),
Reset (Initialization), Transponding (Detection of position of the motor car)


The decoder can be customized in the function by changing the following program
values.


Program items and their values

CV# | Default value | Function | Value range or Value Setting Example

CV01 03 2 digit address 01～127
CV02 00 Start Voltage 00～255 (Voltage 0～100%)
CV03 00 Acceleration rate 00～31 (Rapid～Slow Change)

CV04 00 Slowdown rate 00～31 (Rapid～Slow Change)
2

CV05 00 Maximum Voltage 00～255 (Voltage 0～100%)

CV06 00 Voltage at mid point 00～255 (Voltage 0～100%)

CV08 129 For Reset* Enter 08 for reset

CV29 06 To set speed steps 06, 07, 38, 39, etc.

CV57 06 Grade of BEMF effects 00～15 (Single Motor-Car traction)


* “129”, the default value under CV08 is a maker ID No. Regardless of the figure,
please enter “08” for Reset (the value will return to the default value.)


Compliance, Warnings & Handling.


Please use this decoder in combination with devices complying with NMRA DCC rules.

With controlling devices employing another digital system, it will not work.


This product is an electronic device. So rough handling, water or static electricity may
break the chip.


As it is a p.c.board, it has tiny and pointed parts.

Please store the product where small
children cannot reach their hands to.


Train car installed with the DCC decoder can be run on analog-operated track as well,
but may not run when the power pack controller does not match with it.


The specifications and price of the product is subject to change without
preannouncement.